The Boat ladder- S is made of high quality pine plywood with a natural finishing. It has an inclination of 70º and it includes a handrail which ease the ascent and descent. It can be installed at any small structure. It can also be adapted easily at any height, cutting its stringers at the marks disposed in the same ones.
It can be located in any of the four sides of the mezzanine and even inside the structure.
Availability date:Add Product Questions
|Kind of product||Stairs & Ladders|
|Maximum height above the flooring board (cm)||233|
|Minimum height above the flooring board (cm)||160|
|Height-adjustable every (cm)||12,1|
|Which height above the flooring board is needed?||From 209 to 233 cm, From 173 to 209 cm, From 160 to 173 cm|
|Maximum load (Kg)||150|
|Incline and shadow||70º / The shadow of the stairs is 37% of the height.|
|Kind of stairs||Ladder|
|Measures of the steps (cm)||46,2 x 10,7|
|No. of steps||7|
|Material of the steps||European Radiata pine plywood 30 mm thick|
the boat ladder is ideal to T8 structure. The way of assembly is similar to the SW-T8 Wooden Ladder.
Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.
Personalised phone or email service from our specialists
The stairs can be placed in different positions, increasing the possible configurations
Case 1: Exterior stairs, perpendicular to the mezzanine.
Case 2: Interior stairs. You will need a beam for interior stairs.
Case 3: Exterior stairs, parallel to the mezzanine. You will need a stair landing.
Case 4: A different placement to our mezzanines.
Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details
Yes. They can be installed on a surface that is not a Tecrostar surface. The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.
If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:
References that have this anchor: 30501, 30401, 31003, 31301, 31102
Referencias que llevan este anclaje: 30303-0
References that have this anchor: 30601, 30801
Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.
For products in stock (white and black for S, M and L ranges), the delivery time will be approximately 5 working days from placing the order. Once the product has left our facilities, the normal transport time is between 7 and 10 working days. The transport time varies greatly and is difficult to control due to many factors: Place of delivery, local holidays, customs, etc.
If we cannot meet this delivery time, we will contact you.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift. The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg). The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
Tablas comparativas de escaleras
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.