> >Public Access Stairs 30º
Public Access Stairs 30º
Public Access Stairs 30º
Previous
  • Public Access Stairs 30º
  • Public Access Stairs 30º
  • Public Access Stairs 30º
  • Public Access Stairs 30º
  • Public Access Stairs 30º
  • Public Access Stairs 30º
  • Public Access Stairs 30º
  • Public Access Stairs 30º
Next

Public Access Stairs 30º

The public access stairs S are adequate according to the regulations that lay down access and evacuation requirements with a great public concurrence, unlike other industrial or private stairs that are not as demanding.

These stairs  are the suitable solution for the Tecrostar mezzanines belonging to the same range. It is adjustable in height and can be placed in different locations, thanks to its versatile upper anchor.

The stairs 30º are the ideal access element for the mezzanine because its height can be adjusted according to the dimensions selected by each customer.

More details

Add Product Questions

$51,570

Shipping included

Do it for you

More info

These stairs meet the french regulations and  support a maximum load of 150 kg. For its assembly, it is necessary to have a height between 160 and 233 cm above the floor. The going is 28 cm and the height between steps is 16 cm. The skirting measures 47 cm and the distance between the handrail tubes is 20 cm.

The public access stairs S can be located inside the mezzanine to avoid it projecting beyond the  mezzanine floor. It can be located in any of the sides as well, perpendicular or parallel to the structure using a stair landing of the same range. Moreover, it allows to place more steps. In this case, Tecrostar recommends to maintain always the same distance between the steps to ease the transit through the stairs.

Since the wooden skirting board is chipboard, Tecrostar DOES NOT recommend the use of this product outdoors.

Data sheet

Type of productStairs & Ladders
Kind of stairsStraight
RangeSmall
CompatibilityLarge, Medium, Small, Extra Large
Maximum height above the flooring board (cm)233
Minimum height above the flooring board (cm)160
Available heights above beams (cm)232, 158, 171, 183, 195, 207, 219
Height-adjustable every (cm)12,1
Material and finish of the handrailsAluminiun Anodized
Material and finish of the postsSteel painted with powder coating
No. of steps14
Measures of the steps (cm)120 x 30
Incline and shadow30º / The shadow of the stairs is 173% of the height.
Going (cm)28
Height between steps (riser) (cm)16
Material of the stepsNon-slip and evacuating galvanized steel (with 8 mm interior perforations)
Maximum load per step (kg)200
Uniformly distributed load (kg/m²)200
Anchura útil en cm120

Questions (0)

No customer questions for the moment.

Add product questions
Your Question has been successfully sent our team. Thanks for question!
Add product questions
Hide form
Name:
Email:
Question:
Language:
en
Validation code:
Cant read the image? Click here to refresh
  Add product questions

Questions (0)

No customer questions for the moment.

Add product questions
Your Question has been successfully sent our team. Thanks for question!
Add product questions
Hide form
Name:
Email:
Question:
Language:
en
Validation code:
Cant read the image? Click here to refresh
  Add product questions

Faqs

    What does the kit include?

    Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.

    • All the beams and columns
    • The floor panels
    • All the nuts and bolts
    • Wall anchors
    • Assembly manual
    • Anchors for anchoring the columns to the floor

    Personalised phone or email service from our specialists

    What types of stairs are there in mezzanineshongkong.com?

    You can choose between several types of stairs:

    • Straight stairs

    • Spiral stairs

    • Ladders

    • Retractable ladders

    • Alternating tread stairs

    Where can I put the stairs?

    The stairs can be placed in different positions, increasing the possible configurations

    Case 1: Exterior stairs, perpendicular to the mezzanine.

    Case 2: Interior stairs. You will need a beam for interior stairs.

    Case 3: Exterior stairs, parallel to the mezzanine. You will need a stair landing.

    Case 4: A different placement to our mezzanines.

    Are the stairs compatible with different ranges?

    Yes, provided that the height matches. All our stairs can be located in any of our structures. As the structures, the stairs are height-adjustable. We have several different types of stairs, to ensure the height compatibility with the selected mezzanine.

    Can the stairs be placed outdoors?

    Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details

    Can the stairs be anchored to a mezzanine or construction wall?

    Yes. They can be installed on a surface that is not a Tecrostar surface. The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.

    How are the stairs anchored to the top?

    If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:

    Anchor A

    References that have this anchor: 30501, 30401, 31003, 31301, 31102

     

     

    Anclaje B:

    Referencias que llevan este anclaje: 30303-0

     

    Anchor C:

    References that have this anchor: 30601, 30801

    What stairwell is needed for the electric lift kit?

    The minimum width is 745 mm and the maximum is 1145 mm. The length should be more than 1300 mm.

    Can the electric kit be used to lift non Tecrostar stairs?

    No, it can’t. This kit is specially designed to be used with our staircases.

    Do they meet the building regulation and can they be used inside a house to access the 2 nd floor?

    It depends on the use. The regulation is for stairs for common use and our stairs are for private use. Our stairs that comply are the 42nd: Long Stair M  and  L Stair

    How can I turn the stairs up to allow the transit underneath them?

    The anchor that joins the stairs to the mezzanine can attach the stairs with 4 or 2 screws. If you choose the configuration of just 2 screws, the stairs can pivot. In any case, the stairs have the same resistance.

    Can I vary the direction of rotation of the spiral stairs?

    Yes, the direction of rotation can vary.

    Can the angle of inclination be changed?

    Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.

    Can I add extra steps?

    The stairs include the maximum number of steps that are required in their maximum heights. The more the height is reduced, the less steps will be installed. However, you can acquire additional steps as spare parts, the number of steps is designed according to the inclination of each staircase though. An excessive number of steps would reduce the going available for treading, specially important when going down.

    Can the railing of the stairs be taken off?

    Yes, the railing of both sides of the stairs is removable and, therefore, it can be taken off. However, Tecrostar recommends to install it for security and because they provide rigidity to the stairs as well. On the other hand, the stairs include the railing; it is not possible to acquire them without the railing.

    What are the dimensions and the weight of the stairs package?

    For the orders that include just the stairs, the dimensions of the package are:

    Length: 235cm

    Width: 32cm

    Height: 31cm

    The weight depends on the model of the stairs. Check the product sheet.

    Can the spiral stairs be installed inside the mezzanine?

    Yes. You will have to acquire the beam for interior stairs.

    How much weight do the steps support?

    Check the the table with the specifications of each staircase to get this information.

    Can I buy the stairs with just one side of railing?

    No, you can’t.

    How is it installed?

    To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accident.

    When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.

    You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)

    You can find all the tools required to assemble it and tested by Tecrostar in the tools section.

    All the models are installed by following these steps:

    Pre-assemble the structure on the floor in the desired area.

    Raise the outer structure to the desired height.

    Finish assembling the structure and floor.

    What is the delivery time?

    For products in stock (white and black for S, M and L ranges), the delivery time will be approximately 5 working days from placing the order. Once the product has left our facilities, the normal transport time is between 7 and 10 working days. The transport time varies greatly and is difficult to control due to many factors: Place of delivery, local holidays, customs, etc.

    If we cannot meet this delivery time, we will contact you.

    How is the product shipped and received?

    Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).

    How do I get the product up to my home?

    Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.  The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg).  The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.

    Stair comparison

    Tablas comparativas de escaleras

    Spiral Stairs

    Ladders

    Straight Stairs (private/domestic use)

    Straight Stairs (public/industrial use)

    Characteristics of the materials

    Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.

    • The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
    • Structure hardware grade 8.8
    • Anodized aluminium apt for outdoor use
    • The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
    • Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.

    TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.

    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados