The Stair Landing L for the upper landing of the stairs is useful when you want to place the stairs parallel to one side of the mezzanine and outside it, as shown in the picture below.
This kit consists of a special pillar with a support for the primary beam. On the other side, the stair landing is attached to the existing mezzanine by 2 small telescopic secondary beams.
Its width is adjustable according to the specified measurements. The stair landing kit includes the flooring boards to cover its surface, provided that the width is set up to a maximum of 122 cm. If the stair landing is set with a bigger width, you will need to acquire an extra flooring board.
Length: 85 cm. You can extend this dimension by buying a Stair Landing Extension L kit.
Width: From 106 cm to 186 cm.
Height: exactly the same as the L range.
Availability date:Add Product Questions
|Kind of product||Stairs & Ladders|
|Maximum height above the flooring board (cm)||343|
|Minimum height above the flooring board (cm)||209|
|Beam height (cm)||30|
|Height-adjustable every (cm)||12,1|
|Which height above the flooring board is needed?||From 282 to 343 cm, From 233 to 282 cm, From 209 to 233 cm|
|Kind of stairs||Accesories|
|Flooring material||European Radiata pine plywood 18 mm thick|
Zone A: Delivery is free (only when total amount exceeds 700€). Countries: UK, Spain (except Canary Islands, Islas Baleraes, Ceuta, Melilla), Portugal, France (except islands and Overseas Territories*), Andorra, Belgium, Holland, Denmark, Sweden, Germany, Austria.
Zone B: Shipments cost about 225 euros. Countries: Switzerland, Slovenia, Slovakia, Czech Republic, Croatia, Montenegro, Macedonia, Yugoslavia, Bosnia-Herzegovina, Bulgaria, Romania, Poland, Filandia, Norway, Estonia, Latvia, Lithuania, Belarus, Ukraine, Russia, Ireland, Spain Islas Baleares, Canarias, Ceuta and Melilla...
Rest of the world. Ask Tecrostar, since this may vary depending on the distance.
For products in stock (white and black), once placed the order the delivery time will be approximately 7 working days.
During our holiday seasons, August, Christmas and Easter, there might be delays in the shipping of the orders.
We inform our customers that TECRO subcontracts the delivery service of its TECROSTAR products. We work together with top international companies, in order to deliver every single order on time and in the best possible way. However, TECRO cannot take charge of economic compensations which arise from the delivery service of its products.
In any case, TECRO will provide support and coverage as far as possible, so that delays do not occur. In the event of a delay, the delivery service provider will take care of the situation.
Mezzanines are shipped in boxes by an external agency. Products are transported in a truck with a raising platform that allow to unnload the box to the ground (to the building entrance in the street)
The characteristics of the Tecrostar packages are:
Do not be scared by the total weight of the product, the pieces are light and handy, so you can easily move them and upload them in the elevator. The heavier pieces are the structural wooden boards (34kg - 2 x 0,9m) that form the floor of the mezzanine. For its handling we recommend 2 people, although the panels fit easily into any elevator.
In most cases it is possible.
In the following video you can see how to install a T15-M completed mezzanine.
Scaffolds or ladders might be required for works at height, specially when the structure is higher than 3m.
Other products like stairs or railings are easier to install and require less tools.
You can do it yourself. Just need a friend to help you out. You can install it easily in a few hours, depending on the product.
* Due to the high weight of the materials, the installation of this structure requires to use a considerable force.
You can choose the payment method you prefer:
Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.
Personalised phone or email service from our specialists
The stairs can be placed in different positions, increasing the possible configurations
Case 1: Exterior stairs, perpendicular to the mezzanine.
Case 2: Interior stairs. You will need a beam for interior stairs.
Case 3: Exterior stairs, parallel to the mezzanine. You will need a stair landing.
Case 4: A different placement to our mezzanines.
Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details
Yes. They can be installed on a surface that is not a Tecrostar surface. The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.
If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:
References that have this anchor: 30501, 30401, 31003, 31301, 31102
Referencias que llevan este anclaje: 30303-0
References that have this anchor: 30601, 30801
Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.
For products in stock (white and black for S, M and L ranges), the delivery time will be approximately 5 working days from placing the order. Once the product has left our facilities, the normal transport time is between 7 and 10 working days. The transport time varies greatly and is difficult to control due to many factors: Place of delivery, local holidays, customs, etc.
If we cannot meet this delivery time, we will contact you.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift. The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg). The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
Tablas comparativas de escaleras
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.