It makes the most of big spaces and it is highly resistant. The full Mezzanine TL 30, with metallic structure and wooden floors, creates spaces up to 30m² and has a load bearing capacity up to eleven tons. Its excellent finishes make it the ideal mezzanine for converting an industrial space into an elegant and versatile professional space.
You can install the metal mezzanine TL 30 yourself without construction works, and start using it instantly, as the full TL30 kit comes with all the accessories.
If you want to install the stairs inside the mezzanine, it is necessary to acquire the Beam for interior stairs L kit.
Availability date:Add Product Questions
The Mezzanine TL 30 with long straight stairs L is a metal mezzanine extensible up to 30m². Robust and strong; it has a maximum load bearing capacity up to 11 tons. Ideal for taking advantage of large surfaces, it offers excellent results in industrial spaces and at homes as well, thanks to its elegance and the quality of its finishes. Our customers have installed the metal mezzanine TL 30 in industrial units, lofts and studios tailored to the most demanding needs.
The fixation of the mezzanine depends on its configuration and on the place where it is installed. It is necessary to stabilize the mezzanine as shown below.
The columns of the L mezzanines are square shaped and are made of structural-quality materials. Consequently, they have a fabrication mark related to the traceability which indicates the heat number, steel type…
|Kind of product||Full Kits|
|Maximum height above the flooring board (cm)||343|
|Minimum height above the flooring board (cm)||209|
|Beam height (cm)||30|
|Height-adjustable every (cm)||12,1|
|Width/Lenght-adjustable every (cm)||10|
|Maximum length of the secondary beam (cm)||535|
|Minimum length of the secondary beam (cm)||345|
|Maximum length of the primary beam (cm)||537|
|Which height above the flooring board is needed?||From 209 to 233 cm, From 233 to 282 cm, From 282 to 343 cm|
|Minimum length of the primary beam (cm)||357|
|Maximum area (m²)||29|
|Minimum area (m²)||14|
|Total maximum load (Kg)||8500|
|Load capacity in its minimum extension (kg/m²)||800|
|Load capacity in its maximum extension (kg/m²)||300|
|Material and finish of the structure||Structural steel painted with powder coating|
|Flooring material||European Radiata pine plywood 18 mm thick|
|Net weight (Kg)||1103|
|Gross weight (Kg with packaging)||1167|
Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.
Personalised phone or email service from our specialists
The metallic Tecrostar mezzanines of the S, M and L ranges support a uniformly distributed load of 200 kg/m² (that means that you can place a 200 kg distributed load on each square meter). This is the live load for residential uses according to the international regulations. The total maximum load will be 200 kg by the square meters of the mezzanine.
The XL mezzanines support higher loads, 500 kg/m² (considered as medium storage) and their usage is more industrial. However, they can also have a domestic use when more resistance and rigidity is required. The bearing board included in the XL kits is thicker, more resistant and allows point loads (pallet truck, racks) as well. Ask Tecrostar the permissible values of these point loads.
Tecrostar products can be installed outdoors (exposed to the elements), provided that a series of special measures are taken during installation and that you carry out regular maintenance in order to ensure that the materials are in good condition. The recommendations are the following:
No, our mezzanines are sold with columns by default. We cannot guarantee the resistance of walls or corbels and the customer will be responsible if the product is modified in these cases.
You can adjust the structural floor, working around architectural barriers or irregular surfaces.
When the walls are irregular or when you want to work around a fixed object, the decking can be finished off against the wall
Adjustment from below:
Adjustment from above:
Yes. This is quite common and the results are very good. The telescopic system of the columns enables the height to be adjusted every 12 cm, so in the worst case scenario you will have a 6cm difference.
For products in stock (white and black for S, M and L ranges), the delivery time will be approximately 5 working days from placing the order. Once the product has left our facilities, the normal transport time is between 7 and 10 working days. The transport time varies greatly and is difficult to control due to many factors: Place of delivery, local holidays, customs, etc.
If we cannot meet this delivery time, we will contact you.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift. The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg). The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.